youtubefacebookinstagramlinkedin

Back to: Zgrzewanie kołków

Inverter stud welding machines Köco Inverter 2305i

Description

Köco stud welding machines are high-performance production equipment that can significantly reduce the cost of joining components when compared to other methods. Threadless and threaded pins, studs with head, anchors etc. with a diameter of 3 to 25 mm can be quickly and high quality welded to sheet metal, pipes, profiles. This eliminates many additional preparatory operations such as drilling, threading, manual welding or tightening.

  • Inverter devices - much lower weight than the corresponding Elotop devices.
  • For arc welding (with ceramic ferrule) or short-cycle welding (SC).
  • For welding in a gas shield (optional) or without.
  • For work in a hall or on a construction site (IP23).
  • A wide selection of guns depending on the diameter of the pin and the application.
  • Stepless regulation of welding current and time.
Model 2305i
Welding range with a ceramic ring - stud diameter Ø2-25 mm
Short-cycle welding - welding range Ø12 mm
Gas shielded welding - welding range Ø2-12 (16) mm
Current setting range - stepless 200-2300 A
Time setting range - stepless 1-1500 ms
Parameter memory (set: welding current, welding time and gas pre-flow) 20
Maximum number of studs/min, with... Ø

5 / Ø22 mm

3 / Ø25 mm
Self-diagnosis Overheating No phase Short circuit Pilot current erro
50/60 Hz power supply 3x400 V
Time-delay power protection 63 / 80 A
Power supply fluctuation tolerance maks. 8 kVA
Maximum welding cable length with welding current and cross section 2000 A/10 m at 95 mm²
Power consumption at...% PJ 8% / 117 kVA 11% / 90 kVA 100% / 17 kVA
IP Rating IP23
Gas shielded welding option
Gas pre-flow 10-2000 ms
Case dimensions 800x310x535 mm
Weight 63kg
Catalogue No. 50 01 303195
Type of welding gun K22D; (option K24 / K26)

The course of arc welding of pins with a ceramic ring 

3

 



Podziel się z innymi!