youtubefacebookinstagramlinkedin

Back to: Zgrzewanie kołków

Inverter stud welding machines Köco Inverter 1305i

Description

Köco stud welding machines are high-performance production equipment that can significantly reduce the cost of joining components when compared to other methods. Threadless and threaded pins, studs with head, anchors etc. with a diameter of 3 to 25 mm can be quickly and high quality welded to sheet metal, pipes, profiles. This eliminates many additional preparatory operations such as drilling, threading, manual welding or tightening.

  • Inverter devices - much lower weight than the corresponding Elotop devices.
  • For arc welding (with ceramic ferrule) or short-cycle welding (SC).
  • For welding in a gas shield (optional) or without.
  • For work in a hall or on a construction site (IP23).
  • A wide selection of guns depending on the diameter of the pin and the application.
  • Stepless regulation of welding current and time.
Model 1305i
Welding range with a ceramic ring - stud diameter Ø3-16 mm
Short-cycle welding - welding range Ø3-8 mm
Gas shielded welding - welding range Ø2-16 mm
Current setting range - stepless 1300 A
Time setting range - stepless 1-1000 ms
Parameter memory (set: welding current, welding time and gas pre-flow) 20
Maximum number of studs/min, with... Ø

2 / Ø16 mm

5 / Ø12 mm
Self-diagnosis Overheating No phase Short circuit Pilot current erro
50/60 Hz power supply 3x400
Time-delay power protection 35 A
Power supply fluctuation tolerance -15/+6 %
Maximum welding cable length with welding current and cross section 1300 A/10 m at 70 mm²
Power consumption at...% PJ 2% / 69 kVA 4,5% / 45 kVA 100% / 9,5 kVA
IP Rating IP23
Gas shielded welding option
Gas pre-flow 100-2000 ms
Case dimensions 550x175x395 mm
Weight 24 kg
Catalogue No. 50 01 303135
Type of welding gun K22

 

The course of arc welding of pins with a ceramic ring 

3



Podziel się z innymi!