PONTE 320 MOST is the unit purposed for welding with MMA coated electrodes and TIG DC welding with friction start (LiftArc). Range of welding current up to 320 A and the possibility of welding with cellulose-coated electrodes makes PONTE 320 universal welder for any kind of MMA welding. The device is equipped with a VRD function, which reduces the open circuit voltage to 9 V (at the moment of arc ignition 67 V).
This unit has an intelligent ventilation system, which works in case of welding or exceeding the temperature specified inside. This solution allows to limit the dust accumulation inside the
device device.
| Model | PONTE 320 |
| Main voltage (50/60 Hz) | 3x400 V +/-10%15% |
| Power I1max | 26 A |
| Effective power I1eff | 17 A |
| Welding current: | |
| at 40% duty cycle | 320 A / 32,8 V |
| at 60% duty cycle | 265 A / 31,2 V |
| at 100% duty cycle | 220 A / 30 V |
| Range of welding current MMA i TIG | 10 – 320 A |
| Open circuit voltage | 62 V |
| Protection class | IP 23C |
| Insulation class | H (180°C) |
| Dimensions | 655x275x385 mm |
| Weight | 23 kg |
| Catalogue no. | |
| Rectifier Ponte 320 MOST | 53 00 040320 |
| Earth and electrode cable 35 mm² | 53 99 990108 |
| TIG holder 26V SGRIP 4 m MOST | 56 01 062634 |
| Argon regulator MOST | 62 30 750400 |
| Trolley | 50 03 003940 |
Control panel – easy to use control panel designed for quick and intuitional change of parameters by a single knob. No need to memorize the sequence of settings for the given function, which greatly simplifies the
welding operation.
Knob is designed to set values. Short press enables setting the parameters values (turning left/right). Press the knob for more than 2 seconds to select the working mode. Device automatically switches to STAND BY mode within 10 minutes, after the last operation is performed. In case of changing the parameters values or arc ignition, device switches to its normal working mode.
PONTE 320 is supported with temperature sensor signaling overheating.
Podziel się z innymi!
Data sheet