FANMIG 201 LCD is a modern semi-automatic welding inverter machine designed for MIG/MAG welding, TIG DC (scratch start) and MMA coated electrode welding. The device is synergic and includes a wide range of programmes for steel, stainless steel and aluminium. The advantage of an inverter with PFC are: higher energetic effectiveness, lower load for electric network, greater tolerance to current fluctuations and less interference generated by the device. The wire feeder enables wire
welding with 5 kg / D200 spools. Recommended steel wire diameters are 0,8-1,0 mm and 1,0 mm for aluminium. After change to the polarisation it is possible to apply selfshielding powder wires with diameter of Ø0,8-0,9 mm. A program for brazing with CuSi3 Ø0,8 mm is available.
Main applications:
Control panel equipped with display presents text messages. Parameter setting is executed with two knobs used both for choosing and confirming functions or values. The panel is secured against damage with transparent glass.
| Parameter | Unit | Value |
| Electrical power supply | V/ Hz | 1x230/ 50-60 |
| Welding current range |
||
| MIG/MAG | A | 20-200 |
| TIG | 10-200 | |
| MMA | 10-200 | |
| Open circuit voltage (MMA) U0 | V | 67 |
| Fuse | A | 16 (slow) |
| Current Ieff | A | 15,7 |
| Current I1max | A | 30,5 |
| Duty cycle | ||
| MIG/MAG | A/% | 200 A/30%; 150 A/60%; 130 A/100% |
| TIG | 200 A/35%; 150 A/60%; 140 A/100% | |
| MMA | 200 A/25%; 140 A/60%; 120 A/100% | |
| Wire feeding speed | m/min | 1,5 – 17,0 |
| Insulation class | F | |
| Protection class | IP 23S | |
| Rolls | 2 x 30/22 | |
| Dimensions | mm | 215x540x410 |
| Weight | kg | 17,7 |
| Catalogue no. | 51 00 023685 | |
Device assembly:
The device is supplied with earth cable for coated electrode welding, a gas hose and a user's manual, standard rolls for 0,8-1,0 mm steel wire.
Additional welding torches and accessories (optional):
| Welding torch M24 SGRIP 3 m | 55 08 302430 |
| Welding torch M24 SGRIP 4 m | 55 08 302440 |
| Welding torch M24 SGRIP 5 m | 55 08 302450 |
| Welding torch M15 SGRIP 3 m | 55 08 301530 |
| Welding torch M15 SGRIP 4 m | 55 08 301540 |
| Welding torch M15 SGRIP 5 m | 55 08 301550 |
| Welding torch TIG 17 4 m F201 | 56 03 011115 |
| Roll 0.8-1.0 | 51 13 007826 |
| Roll 0.6-0.8 | 51 13 007783 |
Accessories for aluminium welding and brazing (recommended wire diameter: 1,0 mm, AlMg5):
| 1,0 AL - 1,2 AL Roll | 51 13 007863 |
| Teflon liners for welding torch 3 m | 55 13 013010 |
| Teflon liners for welding torch 4 m | 55 13 013020 |
| Teflon liners for welding torch 5 m | 55 13 013030 |
| Brass tube for the EURO connection | 51 13 008011 |
Warranty: 24 months.
Podziel się z innymi!
