FANMIG 322 mobil Pulse is a cutting edge semi-automatic welding inverter machine designed for MIG/MAG welding and MMA coated electrode welding. Apart from the short arc welding, Fanmig enables users to weld with MIG/MAG pulse current. FANMIG 322 mobil Pulse has a reduced housing to a size of a large wire feeder with enclosed electrical power supply and a feeding unit.
Main advantages of MIG/MAG puls:
The device operates in synergic or manual mode and includes a wide range of programmes for steel, stainless steel and aluminium pulse and short arc welding methods. Thanks to its simplicity in use it is recommended as a first semi-automatic „MIG plus” welding device in your workshop.
The device is powered from a three-phase 400 V. The 4-rolls wire feeder enables wire welding with 5 or 15 kg reels. Recommendedsteel wire diameters are 0.8 - 1.0 mm and 1.0 mm for aluminium. The inner cell of the wire feeder is illuminated with a diode for easy wire installation, roll changing, etc. Device is also fitted with a button for ad hoc wire feed from the new reel.
Main applications:
Simple and modern design of control panel. Parameters setup is performed by means of two multifunctional knobs. LCD shows parameter values during setting adjustments and real-time values during work performance. The LEDs next to the LCD informs which parameter is presented and what is the used unit: A, V or s. It is possible to save up to 6 personalized programmes entered to memory with buttons from 1 to 6.
| Parameter | FANMIG 322 mobil Pulse | |
| Welding method | MIG/MAG | MMA |
| Electrical power supply [V] | 3x400/ 50/60 Hz | |
| Fuse [A] | 16 slow | |
| Max. current drawn from the network | 23,9 | 22,9 |
| Effective current I | 13,3 | 12,8 |
| Welding current range [A/V] | 20 A/15,0 V – 315 A/29,8 V | 10 A/20,4 V – 300 A/32,0 V |
| Open circuit voltage U0 [V] | 63 | |
| Welding current [A] at: | ||
| 100% duty cycle | 210 A / 24,5 V | 190 A / 27,6 V |
| 60% duty cycle | 250 A / 26,5 V | 230 A / 29,2 V |
| duty cycle for max. current | 25% / 315 A / 29,8 V | 20% / 300 A / 32,0 V |
| Welding current set point | Stepless | |
| Wire feeder | 4-rolls | |
| Wire feeding speed [m/min] | 1 – 16 | X |
| Welding torch cooling | Air | |
| Welding Torch (gas) | See options | |
| Weight [kg] | 26,6 | |
| Protection class | IP 23S | |
| Insulation class | H | |
| Dimensions [mm] height x length x width | 438 x 650 x 240 | |
Warranty: 24 months
Device is delivered in cardboard box with power plug included (CEE 16 A). The equipment includes a ground cable, gas hose and user manual. the wire feeder has rollers for 0.8-1.0 mm steel wire welding.
Catalogue no. for FANMIG 322 mobil Pulse 51 00 023930
Podziel się z innymi!
Data sheet